Easy Care care kit for all furniture made of wild oak | Pure

Art-Nr:HZ10962136
Dimensions:13,5 x 10 x 10,5 cm
Weight:1 kg
Delivery time: 2 - 5 Days

Order check:
So we want to make sure that all products are compatible.
We will check your order before shipping!

Product information ''Easy Care Kit Furniture''

Products included

  • 100ml Rubio MONOCOAT Soap
  • 100ml Rubio MONOCOAT Maintenance Oil Universal VOC - Free Pure
  • 20ml Rubio MONOCOAT Oil Plus Pure (A component)
  • 1 Rubio MONOCOAT application sponge
  • 1 Rubio MONOCOAT polishing cloth
  • 1 Rubio MONOCOAT ''Easy Care Kit'' Flyer
General information
In the RMC ''Easy Care Kit Furniture'' you will find various care products that will provide you with basic equipment for the care of your furniture. The box contains all the necessary products for cleaning, refreshing and maintenance.

Rubio MONOCOAT Maintenance Oil Universal is used for refreshing and renewing wood surfaces, Rubio MONOCOAT Oil Plus 2C - A is used for color refreshing and wood protection, and Rubio MONOCOAT Soap is needed for regular maintenance cleaning of the wood.

Application areas / Suitability
Use on all oiled wood surfaces indoors, especially furniture.

Drying time:
RMC Maintenance Oil Universal = 6 - 8 hours
RMC Oil Plus A-component = 14 days (crystallization)

Water resistance:
RMC Maintenance Oil Universal = after 3 days
RMC Oil Plus (A) = carefully damp wipe from the second week of drying.

Result
With this combination your furniture surfaces are refreshed, maintained and gently cleaned. All in all you get an ideal care.

Ingredients
All included paint and wood preservative oils are absolutely VOC- and solvent-free and thus protect the environment as well as your health!

Processing
For the exact processing, see the instructions for use in the technical data sheets.

Renew with RMC Maintenance Oil Universal (for re-oiling)
- In case of manual application, apply oil with a cloth, brush or sponge.
- Preferably proceed in zones of 2 to 4 m² each. The respective treated zones must be wiped with kitchen paper or a cotton cloth within 15 minutes.
- Ensure good ventilation after treatment. After approx. 6 - 8 hours the surface can be used again.

Wood preservation with RMC Oil Plus (A) (oil raw wood)
- Apply a small amount of RMC Plus with a cloth and spread it.
- Allow the oil to act and react for a few minutes. Within the next 10 to 15 minutes, you should remove the excess oil with a cotton cloth.
- The surface should now be dry to the touch.

Regular cleaning with RMC Soap (for everyday cleaning)
- Pour 100 ml of RMC Soap into a bucket filled with 10L of clean water.
- Clean the surface with a mop or floor cloth.
- Drying time: +/- 15 minutes.

Requirements
Since the application of only one layer of oil is necessary, the handling of the oil is particularly easy and user-friendly. The special technology of molecular bonding prevents streaks and film formation, as well as overlapping and build-up. The practical set contains all products for an all-round care and is therefore easy to handle and suitable for every home craftsman!

Consumption
The contained products are sufficient for the treatment of the following floor area:
- 100 ml RMC Maintenance Oil approx. 15 -20 m²

- 20 ml RMC Oil Plus (A) approx. 0.5 - 1 m²


Tools & Accessories
For manual application of the oils, a simple cotton cloth, brush or sponge is required.

For cleaning, normal cleaning accessories such as a mop or floor cloth and a bucket can be used.

Further information / safety instructions
Attention Care Oil and Oil Plus 2C

Cloths soaked with the product may self-ignite and must be neutralized in water after use.

Specification

Order check:
So we want to make sure that all products are compatible.
We will check your order before shipping!

Personal advice
Daily until 17:00
+49 (0)5405 96099-55

Return of the goods?

  • The return of the goods is not free of charge. Thus, the costs for the return must be borne by the buyer. We ask for your understanding because we deal with heavy and sensitive products.

Exhibition - can I see the products live?

  • We have an exhibition in Lotte near Osnabrück. You are welcome to visit us by appointment. Make an appointment now on +49 (0) 5405 96099 0. Don't live near us? Use our dealer search now and find a dealer near you. We are also happy to help you by phone.

 

 

River stone

River stone is a particularly hard and resistant natural stone from the Javanese tropical rivers of Indonesia. The different colours, shades and structures characterise the individuality of each washbasin and are created by the oxidation of the stone. Despite its hardness, the river stone is very sensitive to acids, which is why acidic cleaners should be avoided when caring for it.

Care

A natural stone sink should be clean and dry as soon as it is no longer in use. This is especially important if your water has a high mineral content. After use, please clean the sink with a mild cleaner or soap (free of acid and chlorine) and wipe it out with a damp cotton cloth that does not lint. Despite the hard material, natural stone should be protected from pointed and sharp objects, as these can permanently damage the surface. Water above 60 degrees Celsius should also not be used. Avoid contact with concentrated bleaching agents, corrosive agents, lyes and other acidic cleaners at all costs. These will cause changes in the colour.

Hard stone (bluestone, granite)

These are resistant hard stones. However, only granite is almost insensitive to acids. Therefore, you should also avoid acidic and chlorine-containing cleaners for hard stones. To protect a bluestone from absorbing skin grease, for example, we recommend impregnating it with Lithofin Fleckstop PLUS. Fleckstop PLUS protects against stains, deepens the colour tone ("wet effect") and repels water. If you do not regularly saturate the surface of bluestone with an impregnation, the stone will lose its colour intensity over time. If you value a natural patina, you should do without impregnation.

Care

A natural stone sink should be clean and dry as soon as it is no longer in use. This is especially important if your water has a high mineral content. After use, please clean the sink with a mild cleaner or soap (free of acid and chlorine) and wipe it out with a damp cotton cloth that does not lint. Despite the hard material, natural stone should be protected from pointed and sharp objects, as these can permanently damage the surface. Water above 60 degrees Celsius should also not be used. Avoid contact with concentrated bleaching agents, corrosive agents, lyes and other acidic cleaners at all costs. These lead to changes in the colour.

Marble (marble, travertine, onyx)

Marble is a crystallised limestone that is formed inside the earth under pressure and heat. In its pure state, marble is white. The different colourings are caused by oxides of various metal salts. Marble is a medium-hard natural stone and is very sensitive to acids, which is why acidic cleaners should not be used for care.

Care

A natural stone sink should be clean and dry as soon as it is no longer in use. This is especially important if your water has a high mineral content. After use, please clean the sink with a mild cleaner or soap (free of acid and chlorine) and wipe it out with a damp cotton cloth that does not lint. Despite the hard material, natural stone should be protected from pointed and sharp objects, as these can permanently damage the surface. Water above 60 degrees Celsius should also not be used. Avoid contact with concentrated bleaching agents, corrosive agents, lyes and other acidic cleaners at all costs. These will cause changes in the colour.

Teak

The teak tree is characterised by an exceptionally high rubber content, which makes the wood particularly resistant to water and, due to its oily nature, extremely resistant to abrasion and acid. The wood of the teak tree is considered indestructible and can withstand even severe climatic changes. Teak comes from Southeast Asia and covers about eight million hectares of land in India. Teak has been growing on the Indonesian island of Java since about the 14th century and is one of the most resistant woods.

Care

The care of teak is very simple and can be done by anyone with little effort.

On delivery, the furniture is already provided with two layers of water-based varnish so that the furniture is protected and immediately ready for use. Depending on the stress on the furniture, we recommend re-varnishing it if necessary. To do this, sand the surface first and apply the new lacquer with the help of a lacquer roller. We recommend a transparent matt acrylic PU lacquer.

Shipping

Calculation of shipping costs

The shipping cost of your order will be calculated by us individually according to the weight of the goods. The shipping costs by weight can be found in the following table.
In addition, you will find the current shipping costs to your order in the shopping cart. If you have any questions about the ordering process, we will be happy to answer them by phone: +49 (0) 54 05 960 990 or e-mail information.



Switzerland: shipping to Switzerland

The delivery to Switzerland is net. The buyer bears the additional fees incurred for customs clearance, import and import fees.
The items will be shown to you as a net price. The Swiss VAT is borne by the buyer. Payment in advance: bank transfer or PayPal.

 

Free shipping

From a value of goods of 2.000,00 euros, we ship your order free of shipping costs within Germany. The islands are excluded from this offer.

 

Shipping methods

Deliveries by parcel service [DHL]

You will receive a tracking code by email and can conveniently track your delivery.

 

Shipping by freight forwarding

Our long-standing house forwarding agency delivers in principle after telephone appointment arrangement Mon.-Fri. 08:00 - 17:00 clock.
The delivery is free house curbside with a lifting platform vehicle. You will also be sent a tracking number by e-mail and can thus track the delivery.

 

Modes of Payment